RHD Conversion Exhaust Full System 200Tdi Discovery Series SWB
RHD Conversion Exhaust Full System 200Tdi Discovery Series SWB, SKU EXHS3SWBDVY200
This is a stainless-steel full Conversion Exhaust System for LAND ROVER Series 2 to Series 3 Short wheelbase 88″ fitted with a 300Tdi Engine conversion.
We manufacture this conversion exhaust 2½” Aluminised mild steel pipework with mild steel flanges, in our engineering shop here in the UK
This full conversion exhaust kit comprises of
Specially made Front pipe
Specially made Connector pipe
Specially made Intermediate pipe
Specially made Rear silencer
All in a larger bore than the standard exhaust, a rear silencer with a larger bore inlet and tailpipe, with the internals of the silencer suitable for a turbo engine. This kit comes with nuts, bolts and washers to fasten the pipework together, hangar rubbers, mild steel larger than standard intermediate pipe clamps and tailpipe bracket. Fitting instructions are also included.
This full conversion exhaust kit is designed to follow the same route as the standard exhaust system and to hang on the same chassis brackets as the standard exhaust and is designed for vehicles that have are fitted with standard leaf springs and the standard Series gearbox. We can supply a modified intermediate pipe if the LT77 is fitted. Please contact us for more information
Click here for summary of installation Series Models
We also have other kits available for this conversion including Radiator hoses, Intercooler Pipework, electric fan kits, Flywheel Housing Fixing bolts which are all listed in RELATED PARTS BELOW
Individual exhausts are also in the related items below.
Other systems available are: –
Stainless steel full system
300Tdi manifold is fitted to 200Tdi engine, full system
Left hand Drive full system
Steve Parkers Limited have been designing and fitting land rover engine conversions for over 40 years. We have also been manufacturing in house, conversion exhausts for over 25 years. We try to supply a comprehensive set of conversion kits, so that when the job is finished it looks like a factory installation. They are supplied as separate kits to allow them to be bought individually or they can be added to the basket and all bought at once depending on your requirements. Many of our conversion parts are manufactured by a company with en iso 9002 approved and covered by liability insurance.
STEVE PARKERS LIMITED have been designing and manufacturing conversion exhausts for over 25 years. Many of our exhausts are made in aluminised mild steel, 409 or 304 grade stainless steel. With mild steel flanges. Usually, they are designed for the engine requirements but also, we try to use the standard chassis brackets and rubber mountings. However, on some model’s other brackets may be required due to the many models of Land Rovers. We specialise in low volume bespoke exhausts.