300Tdi Discovery SS Conversion Exhaust LR Series LWB
300Tdi Discovery SS Conversion Exhaust LR Series LWB, SKU EXHS3LWBD300S,
Conversion Stainless Steel Exhaust System 300Tdi Discovery fitted in Series 2, to Series 3 Long Wheel Base
Larger bore exhaust system designed for a turbo engine. Manufactured in 304 grade Stainless Steel with mild steel flanges
IMAGE IN ALUMINISED MILD STEEL FOR ILLUSTRATIVE PURPOSES ONLY
Kit comprises of specially made
Silencer and tail pipe.
Complete with mild steel clamps and stainless steel nuts, bolts and washers. Designed to hang on the standard chassis mountings where possible, brackets supplied in fitting kit for models without tailpipe bracket on the chassis
Fitting Instructions & Rubber Hanger kit included.
This full conversion exhaust kit is designed to fit with our conversion kit especially our engine bay kit and it follows the same route as the standard exhaust system and to hang on the same chassis brackets as the standard exhaust but there are several variotions of the Lwb models so it it follows the post 1976 models with the fuel tank at the rear.
It is designed for vehicles that have are fitted with standard leaf springs and the standard Series gearbox. The exhaust is designed for the original Land Rover chassis. If a replacement chassis has been fitted there may be some differences in hangar brackets etc., causing fitting issues with the exhaust which is beyond our control.
See link for for summary of installation click here
See related items below for other conversion parts
This can also be used for a 200Tdi engine fitted with a 300Tdi turbo manifold in the Long Wheel Base. We would also recommend the 300Tdi intercooler (FTP8030) and our intercooler pipework kit SPCK338S3C for a RHD Series 3 Please contact us if more information is required.
MADE TO ORDER PLEASE ALLOW 7-10 DAYS BEFORE DISPATCH
Steve Parkers Limited have been designing and fitting land rover engine conversions for over 40 years. We have also been manufacturing in house, conversion exhausts for over 25 years. We try to supply a comprehensive set of conversion kits, so that when the job is finished it looks like a factory installation. They are supplied as separate kits to allow them to be bought individually or they can be added to the basket and all bought at once depending on your requirements. Many of our conversion parts are manufactured by a company with en iso 9002 approved and covered by liability insurance.
STEVE PARKERS LIMITED have been designing and manufacturing conversion exhausts for over 25 years. Many of our exhausts are made in aluminised mild steel, 409 or 304 grade stainless steel. With mild steel flanges. Usually, they are designed for the engine requirements but also, we try to use the standard chassis brackets and rubber mountings. However, on some model’s other brackets may be required due to the many models of Land Rovers. We specialise in low volume bespoke exhausts.
We manufacture this conversion exhaust 2½” aluminised mild steel in our engineering shop here in the UK