3.5V8 RangeRover Conversion Front Exhaust Pipe In S3 SWB

£228.26 (ex.VAT) £273.91 (inc.VAT)

Product Description

3.5V8 RangeRover Conversion Front Exhaust Pipe In S3 SWB

3.5V8 RangeRover Conversion Front Exhaust Pipe In S3 SWB, SKU SPEX25 Conversion Front Exhaust Pipes for Range Rover 3.5 V8 or Land Rover 3.5 V8 into LAND ROVER Series 2-Series 3 Short Wheel Base 88" Manufactured in Aluminised mild steel. Comprises of specially made front pipes, nuts bolts and washers. The front pipes are designed to mate up to Range Rover Classic (1972-1985) Carb type manifolds (These manifolds can be identified by the 3 stud outlets The RH manifold (ERC3101/611520) exits between cylinders 2 & 3, The LH (ERC5069) outlet is at the rear cylinder) These front pipes are designed to mate up to our specially made intermediate pipe (SPEX26) and rear silencer (SPEX5) The full system is available see 35V8SWBEXH Please note we only manufacture the exhaust systems and not the conversion kits.  This kit is now being made by Motor & Diesel Engineering    Tel 01526 830185 IMAGE FOR ILLUSTRATIVE PURPOSES ONLY STEVE PARKERS LIMITED have been designing and manufacturing conversion exhausts for over 25 years. Many of our exhausts are made in aluminised mild steel, 409 or 304 grade stainless steel. With mild steel flanges. Usually, they are designed for the engine requirements but also, we try to use the standard chassis brackets and rubber mountings. However, on some model’s other brackets may be required due to the many models of Land Rovers. We specialise in low volume bespoke exhausts. We manufacture this conversion exhaust 1¾" aluminised mild steel in our engineering shop here in the UK This full conversion exhaust kit is designed to follow the same route as the standard exhaust system and to hang on the same chassis brackets as the standard exhaust and is designed for vehicles that have are fitted with standard leaf springs and the standard Series gearbox. The exhaust is designed for the original Land Rover chassis. If a replacement chassis has been fitted there may be some differences in hangar brackets etc., causing fitting issues with the exhaust which is beyond our control.