SPCK338S3EBK 300TDI ENGINE CONVERSION BOLT ON BRACKET KIT SERIES2 SERIES3
SPCK338S3EBK 300TDI ENGINE CONVERSION BOLT ON BRACKET KIT SERIES2 SERIES3, Conversion Engine Mounting Kit for Land Rover Discovery 300 Tdi or Defender 300 Tdi into Series 2, Series 2A, Series 3 land Rovers.
These brackets are made to bolt to the 300 TDI engine block and will fit a 4 cylinder chassis with no welding required.
The aim of this conversion is to allow the 300 engine to fit using nuts and bolts instead of welding, especially where a galvanised chassis is fitted, however the RH chassis engine mounting bracket will need cutting back. A template is supplied to do this.
THIS KIT IS TO MOUNT THE 300 TDI ENGINE INTO THE ENGINE BAY IN LAND ROVER SERIES 2, SERIES 2A & SERIES 3 4 CYLINDER MODELS
Kit Consists Of
- RH Chassis Mounting Bracket / Cap & Template,
- RH Engine Bracket,
- Sump Bracket to fasten engine to
- Turbo Bracket (Boost Control Unit), turbo outlet needs rotating, Manifold Gasket etc
- Alternator Bracket (Alternator is Relocated) and Drive Belt (inform us if PAS is being fitted so we can supply a longer belt)
- Special fixing bolts required for the various brackets.
The 300 TDI flywheel housing will fit the Series model 2¼ litre petrol or diesel bellhousing with no modifications to the bell housing. However the 300TDI flywheel housing will need some alterations to suit the adaption to mate up to the Series bellhousing. This involves drilling out and tapping one hole to take a bell housing stud.
The original Left Hand 2¼ litre petrol or diesel engine block mounting bracket must be used with this conversion, so please retain this from the old 4 cylinder engine you have removed.
This conversion cannot be carried out with EDC engines that were fitted in to the Discovery automatic gearbox models from 1996 onwards.
See summary of installation for more details Series 300Tdi
See related parts below for other kits available for this conversion. We also supply this as part of a full conversion kit which is also in related items
STEVE PARKERS LTD HAVE BEEN DESIGNING AND FITTING LAND ROVER ENGINE CONVERSIONS FOR OVER 30 YEARS. WE HAVE ALSO BEEN MANUFACTURING IN HOUSE, CONVERSION EXHAUSTS FOR OVER 20 YEARS. WE TRY TO SUPPLY A COMPREHENSIVE SET OF CONVERSION KITS, SO THAT WHEN THE JOB IS FINISHED IT LOOKS LIKE A FACTORY INSTALLATION. THEY ARE SUPPLIED AS SEPARATE KITS TO ALLOW THEM TO BE BOUGHT INDIVIDUALLY OR CAN BE ADDED TO THE BASKET AND ALL BOUGHT AT ONCE DEPENDING ON YOUR REQUIREMENTS