SPCK224FK90 200Tdi Discovery Engine Conversion Full Kit LR 90
SPCK224FK90 200Tdi Discovery Engine Conversion Full Kit LR 90. DISCOVERY 200 TDI ENGINE INTO A LAND ROVER DEFENDER 90
FULL CONVERSION KIT CONSISTS OF
- SPCK224W WATER PIPE KIT (WITH CUSTOM BOTTOM HOSE)
- SPCK224C INTERCOOLER PIPE KIT
- SPCK224A COMPLETE 200 TDI AIR FILTER KIT (SEE GALLERY PHOTO)
- SPEX102 CUSTOM EXHAUST DOWN PIPE
- 90TDREXH TURBO REAR EXHAUST KIT INCL CHASSIS AND RUBBER MOUNTINGS
- SPCK224BLT FLYWHEEL HOUSING BOLTS
- SPCK224BLTD FLYWHEEL HOUSING BOLT FITTING KIT (DRILLS AND TAPS)
- SPCK224PAS PAS PIPE EXTENSION KIT (FOR 4 BOLT PAS BOX & DISCOVERY PAS PIPES)
ALL KITS COME WITH FITTING INSTRUCTIONS
MORE OR LESS EVERYTHING YOU NEED TO FIT A DISCOVERY 200TDI INTO YOUR DEFENDER
THIS CONVERSION WILL NEED AN ELECTRIC FAN KIT DA8967
ALL THESE KITS ARE AVAILABLE SEPARATELY, FOR MORE DETAILS SEE RELATED ITEMS BELOW AND CLICK THROUGH
We recommend fitting the 200Tdi Discovery intercooler or a Defender 200Tdi intercooler as they are the original ones designed for the engines. These specially made intercooler pipes fits directly onto the Discovery 200Tdi intercooler, they are designed in such a way to allow the air to flow through the system easier without restrictions,
The Intercooler Kit comprises of specially made metal beaded pipework in aluminised mild steel and rubber hoses to connect to the Discovery or Defender 200 Tdi radiator Also includes stainless steel hose clips.
This Conversion Water pipe kit for 200 Tdi Discovery in 90 and 110 consists of top hose, heater hoses, stainless steel hose clips, temp senders (both coarse thread and fine thread ) specially made bottom hose. This bottom hose has been updated with an extra overlay seal where the spigot hose meets the main hose for an extra seal. The actual spigot hose has also been lengthened as some models have extra pulleys fitted.
The Flywheel Housing Bolt kit, are Countersunk bolts which are to replace the standard ones which are removed when taking the engine out of the Discovery. The standard ones won’t fit due to the bolt head protruding the Flywheel housing and are also too long. These bolts need to be fitted before the engine is fitted into the vehicle and the flywheel housing will need countersinking, we also include the tools for this. Failure to fit these bolts will cause oil leaks.The flywheel housing gasket & rear crank seal doesn’t form a good seal and therefore leaks from these due to the engine and flywheel housing flexing. The flywheel housing is only secured at the top and not all the way round. Fitting these bolts will also secure the ladder frame. Note, These bolts are not for securing the gearbox to the engine
Front Conversion Exhaust pipe is specially made and fits directly onto the Discovery 200 Tdi turbo outlet and is designed in such a way to allow exhaust gases to flow through the system easier without restrictions. No modifications are required to the vehicle using this front pipe, the clutch pipe does require moving over, away from the front pipe. The conversion front pipe comes with a gasket, manifold nuts and clamps.
Also included is a standard turbo diesel rear exhaust system as they are made differently internally than a normally aspirated or petrol exhaust system, this allows the exhaust gases to flow properly, so the engine doesn’t overheat and doesn’t cause back pressure. Our pipe is sleeved to suit this system. The intermediate pipe supplied is cut into and then fits into the sleeve up to our conversion front pipe.
200Tdi Conversion Air Filter Kit is to connect up the air filter system. This kit consists of new air filter assembly, standard replaceable paper element, specially made mounting bracket, two air filter mounting straps, 4 air filter rubber bobbins, induction hoses and specially made metal pipework, stainless steel hose clips.
The PAS PIPE extension kit is to extend the Discovery 200Tdi pas pipes to fit into the 90 when fitting the 4 bolt power steering box off the Discovery. This is a better pas box and the pas pipes then fit the box and the pas pump on the engine keeping it all standard.
Comprehensive fitting instructions for all the pieces are included.
Fits RIGHT HAND DRIVE only
Click here for summary of installation Defender 90/110
STEVE PARKERS LTD HAVE BEEN DESIGNING AND FITTING LAND ROVER ENGINE CONVERSIONS FOR OVER 30 YEARS. WE HAVE ALSO BEEN MANUFACTURING IN HOUSE, CONVERSION EXHAUSTS FOR OVER 20 YEARS. WE TRY TO SUPPLY A COMPREHENSIVE SET OF CONVERSION KITS, SO THAT WHEN THE JOB IS FINISHED IT LOOKS LIKE A FACTORY INSTALLATION. THEY ARE SUPPLIED AS SEPARATE KITS TO ALLOW THEM TO BE BOUGHT INDIVIDUALLY OR THEY CAN BE ADDED TO THE BASKET AND ALL BOUGHT AT ONCE DEPENDING ON YOUR REQUIREMENTS