Disco 200TDI Conversion-Land Rover 90 Rear Exhaust Kit
Disco 200TDI Conversion-Land Rover 90 Rear Exhaust Kit. SPCK224X90 Land Rover 90 with a Discovery 200 TDI engine fitted, full exhaust system Larger bore with a single silencer . It is a larger bore than the Land Rover 2.5Petrol and 2.5 Normally aspirated and also the turbo diesel exhausts.
We recommend using the larger bore exhaust that suits the TDI engines so they don’t cause back pressure and overheating issues.
This mates up to our specially made Conversion front pipe (SPEX102) with a specially made connector pipe and then a single rear silencer and a tailpipe manufactured in Aluminised mild steel. This exits in front of the left hand rear wheel (when viewed from the drivers seat)
This kit consists of
Specially made Connector pipe,
Single silencer TDI,
Rear Tailpipe TDI,
3 chassis mounting brackets, and fixings
3 link type mounting rubbers,
Instructions for fitting the front pipe and diagram of rear exhaust sections and brackets
This is an ALUMINISED mild steel system
The connector pipe may require cutting to suit and then slips inside the Conversion front pipe, See photos
STEVE PARKERS LTD have been designing and manufacturing conversion exhausts for over 20 years. Many of our exhausts are made in aluminised mild steel or 304 grade stainless steel. Usually they are designed for the engine requirements but also we try to use the standard chassis brackets and rubber mountings. However on some models other brackets may be required due to the many models of Land Rovers.