Print 
Description
90TDI200REXHSS Defender 90 Conversion 200TDI Full Exhaust Kit SS
90TDI200REXHSS Defender 90 Conversion 200TDI Full Exhaust Kit SS. This is for a full standard 200 TDi exhaust system when fitting a Defender 200Tdi engine in an earlier vehicle. It is a larger bore than the Land Rover 2.5Petrol and 2.5 Normally aspirated exhausts.
We recommend using the larger bore exhaust that suits the 200TDi engines so they don’t cause back pressure and overheating issues
This kit consists of
CONVERSION front pipe (SPEX102SS)
Connector pipe,
Front silencer,
Rear silencer,
4 chassis mounting brackets,
4 mounting rubbers,
Fixings
Instructions for fitting the front pipe and diagram of rear exhaust sections and brackets
This is a STAINLESS steel system with STAINLESS bolts and mild steel brackets.
The connector pipe will require cutting to suit and then slips inside the Conversion front pipe, See photos
These take 8-10 weeks for delivery as the back end is a standard system supplied via double s
DELIVERY VIA PARCELFORCE 48 ONLY 1-2 DAYS IN MAINLAND UK
STEVE PARKERS LTD have been designing and manufacturing conversion exhausts for over 20 years. Many of our exhausts are made in aluminised mild steel or 304 grade stainless steel. Usually they are designed for the engine requirements but also we try to use the standard chassis brackets and rubber mountings. However on some models other brackets may be required due to the many models of Land Rovers.
