300TDI Engine Conversion Bracket Kit 90 110 With LT77 Gearbox
300TDI Engine Conversion Bracket Kit 90 110 With LT77 Gearbox, Bolt On Engine Bracket, SKU SPCK30EBK
Conversion Engine Mounting Kit for Land Rover Discovery 300 Tdi or Defender 300 Tdi into Defender 90 or 110 Using LT77 Gearbox,
These brackets are made to bolt to the 300 TDI engine block and will fit a 4 cylinder chassis with no welding required.
Discovery 300 Tdi engine or a 300 Tdi Defender engine into a Land Rover 90 or 110 when using the LT77 gearbox which was fitted to vehicles from 1983 to 1994.
Recommended on a galvanised chassis.
THIS CONVERSION KIT CONSISTS OF THE FOLLOWING ITEMS:
- SPECIALLY MADE RIGHT HAND ENGINE MOUNTING BRACKET AND SUMP BRACKET,
- MADE FROM 4MM & 6 MM STEEL & BLACK POWDER COATED,
- FIXING BOLTS,
- EGR BLANKING KIT,
- 90 DEGREE ADAPTOR FOR THE TURBO BOOST CONNECTION
- COMPREHENSIVE FITTING INSTRUCTIONS
THE ORIGINAL 4 CYLINDER ENGINE BRACKET IS REUSED FOR THE LEFT HAND SIDE. THESE ARE DESIGNED TO FIT ONTO THE ORIGINAL 90/110 4 CYLINDER BRACKETS ON THE CHASSIS.
NOTE THESE DO NOT FIT WHEN USING THE R380 GEARBOX.
THIS KIT IS NOT SUITABLE TO FIT IN THE SERIES LAND ROVERS
IMAGE FOR ILLUSTRATIVE PURPOSES ONLY
Steve Parkers Limited have been designing and fitting land rover engine conversions for over 40 years. We have also been manufacturing in house, conversion exhausts for over 25 years. We try to supply a comprehensive set of conversion kits, so that when the job is finished it looks like a factory installation. They are supplied as separate kits to allow them to be bought individually or they can be added to the basket and all bought at once depending on your requirements. Many of our conversion parts are manufactured by a company with en iso 9002 approved and covered by liability insurance.
This conversion is designed for the original Land Rover chassis. If a replacement chassis has been fitted there may be some differences in crossmembers and brackets etc., causing fitting issues with some parts which is beyond our control.