2.5 Diesel Conversion Exhaust Series Land Rover SWB EXHS325D
2.5 Diesel Conversion Exhaust Series Land Rover SWB EXHS325D,
Conversion Exhaust System for Land Rover 2.5 Diesel
Fits the following
LAND ROVER Series 2 to Series 3 Short Wheel Base 88″ Right Hand Drive. (Left Hand Drive system is also available)
Manufactured by ourselves in Aluminised mild steel with mild steel flanges
Kit comprise of
Rubber hangar kit and fitting kit
All in larger bore (2″) pipework and silencer designed for a bigger engine, larger tailpipe bracket, clamps, nut bolts and washers,
There are 2 manifolds fitted to the 2.5 Diesel in the 90/110’s The early ones are cone type where the outlet is a beveled out shape and the later ones are o ring type which is just a straight pipe that allows another straight pipe to go up inside it. This front pipe comes with a loose cone for the early type which is discarded for the later o ring type. The o ring type is also fitted to the front pipe see photo in the gallery
This full conversion exhaust kit is designed to follow the same route as the standard exhaust system and to hang on the same chassis brackets as the standard exhaust and is designed for vehicles that have are fitted with standard leaf springs and the standard Series gearbox. We can supply a modified intermediate pipe if the LT77 is fitted. Please contact us for more information
Please check availability but usually in stock.
STEVE PARKERS LIMITED have been designing and manufacturing conversion exhausts for over 25 years. Many of our exhausts are made in aluminised mild steel, 409 or 304 grade stainless steel. With mild steel flanges. Usually, they are designed for the engine requirements but also, we try to use the standard chassis brackets and rubber mountings. However, on some model’s other brackets may be required due to the many models of Land Rovers. We specialise in low volume bespoke exhausts.
We manufacture this conversion exhaust 2½” aluminised mild steel in our engineering shop here in the UK