300Tdi Full Conversion Kit & SS Exhaust LandRover S2-3 SWB LHD

£2,051.79 (ex.VAT) £2,462.15 (inc.VAT)

Product Description

300Tdi Full Conversion Kit & SS Exhaust LandRover S2-3 SWB LHD

300Tdi Full Conversion Kit & SS Exhaust LandRover S2-3 SWB LHD SKUSPCK338S3SWBFKLS, THIS KIT IS FOR A LEFT HAND DRIVE LAND ROVER SERIES2, Series2A, Series3 SHORT WHEEL BASE (88") WITH A STANDARD SERIES GEARBOX CONTAINS:
  • CUSTOM BOLT ON ENGINE BAY KIT
  • COOLING SYSTEM KIT INCLUDING WATER HOSES
  • BRAND NEW MODIFIED INTERCOOLER
  • LEFT HAND DRIVE INTERCOOLER PIPE KIT
  • EXTENDED OIL COOLER PIPES
  • 300 TDI AIR FILTER ADAPTOR
  • TEMP SENDER ADAPTOR
  • CUSTOM MADE LHD STAINLESS STEEL FULL EXHAUST SYSTEM WITH MOUNTINGS ETC
MORE OR LESS EVERYTHING YOU NEED TO FIT A DISCOVERY 300 TDI INTO YOUR LANDROVER SERIES
These brackets are made to bolt the 300 TDI engine into the chassis with no welding required. The aim of this conversion is to allow the 300 engine to fit using nuts and bolts instead of welding, especially where a galvanised chassis is fitted, however the RH chassis engine mounting bracket will need cutting back. A template is supplied along with instructions Some parts may need altering due to the vehicle being a Left Hand Drive This conversion cannot be carried out with EDC engines that were fitted in to the Discovery automatic gearbox models from 1996 onwards. An electric fan kit is required with this conversion, see see related items below
See summary of installation for more details and videos showing this conversion fitted Series 300Tdi  We supply a fan belt with the engine bay kit for the pas pump removed. However if |Power Steering is being fitted and the power steering pump being used, please add a note to the order and we will supply a different fan belt. We can also supply a kit for PAS see this link Series Pas Conversion Some exhaust parts are made to order and may take 7-10 days for this kit to be dispatched Photo shows aluminised exhaust for illustration purposes. ALL THESE KITS ARE AVAILABLE SEPARATELY SEE RELATED ITEMS BELOW STEVE PARKERS LTD HAVE BEEN DESIGNING AND FITTING LAND ROVER ENGINE CONVERSIONS FOR OVER 30 YEARS. WE HAVE ALSO BEEN MANUFACTURING IN HOUSE, CONVERSION EXHAUSTS FOR OVER 20 YEARS. WE TRY TO SUPPLY A COMPREHENSIVE SET OF CONVERSION KITS, SO THAT WHEN THE JOB IS FINISHED IT LOOKS LIKE A FACTORY INSTALLATION. THEY ARE SUPPLIED AS SEPARATE KITS TO ALLOW THEM TO BE BOUGHT INDIVIDUALLY OR CAN BE ADDED TO THE BASKET AND ALL BOUGHT AT ONCE DEPENDING ON YOUR REQUIREMENTS

More Images