300Tdi Conversion Stainless Steel Exhaust Kit Series SWB LHD

£909.90 (ex.VAT) £1,091.88 (inc.VAT)

Product Description

300Tdi Conversion Stainless Steel Exhaust Kit Series SWB LHD

300Tdi Conversion Stainless Steel Exhaust Kit Series SWB LHD, EXHS3SWBD300LSS, This is a stainless-steel full Conversion Exhaust System for LAND ROVER Series 2 to Series 3 Short wheelbase 88″ fitted with a 300Tdi Engine conversion. We manufacture this conversion exhaust 2½” 304 grade stainless steel pipework with mild steel flanges. in our engineering shop here in the UK This full conversion exhaust kit comprises of a Stainless steel specially made front pipe Stainless steel connector pipe, Stainless steel intermediate pipe Stainless-steel left-hand drive rear silencer All in a larger bore than the standard exhaust, a rear silencer with a larger bore inlet and tailpipe, with the internals of the silencer suitable for a turbo engine. This kit comes with stainless steel nuts, bolts and washers to fasten the pipework together, hangar rubbers, mild steel larger than standard intermediate pipe clamps and tailpipe bracket. Fitting instructions are also included. This full conversion exhaust kit is designed to follow the same route as the standard exhaust system and to hang on the same chassis brackets as the standard exhaust and is designed for vehicles that have our engine bay kit fitted (SPCK338S3EBK), with standard leaf springs and the standard Series gearbox.

See link for summary of installation for this conversion click here

This system is made to order and may take 7-10 Days Aluminised system shown in photo for illustration purpose

For other conversion parts see BELOW in related items

IMAGE FOR ILLUSTRATIVE PURPOSES ONLY Steve Parkers Limited have been designing and fitting land rover engine conversions for over 40 years. We have also been manufacturing in house, conversion exhausts for over 25 years. We try to supply a comprehensive set of conversion kits, so that when the job is finished it looks like a factory installation. They are supplied as separate kits to allow them to be bought individually or they can be added to the basket and all bought at once depending on your requirements. Many of our conversion parts are manufactured by a company with en iso 9002 approved and covered by liability insurance. STEVE PARKERS LIMITED have been designing and manufacturing conversion exhausts for over 25 years. Many of our exhausts are made in aluminised mild steel, 409 or 304 grade stainless steel. With mild steel flanges. Usually, they are designed for the engine requirements but also, we try to use the standard chassis brackets and rubber mountings. However, on some model’s other brackets may be required due to the many models of Land Rovers. We specialise in low volume bespoke exhausts. This full conversion exhaust kit is designed to follow the same route as the standard exhaust system and to hang on the same chassis brackets as the standard exhaust and is designed for vehicles that have are fitted with standard leaf springs and the standard Series gearbox. We can supply a modified intermediate pipe if the LT77 is fitted. Please contact us for more information. The exhaust is designed for the original Land Rover chassis. If a replacement chassis has been fitted there may be some differences in hangar brackets etc., causing fitting issues with the exhaust which is beyond our control.