2.8Ltr FORD V6 Conversion Exhaust LR Series SWB LHD

£462.16 (ex.VAT) £554.59 (inc.VAT)

Product Description

2.8Ltr FORD V6 Conversion Exhaust LR Series SWB LHD

2.8Ltr FORD V6 Conversion Exhaust LR Series SWB LHD, This full exhaust system is to fit a 2.3 or 2.8 Ford V6 Petrol into a Series 2, Series 2A or Series 3 Short Wheel Base LEFT Hand Drive Manufactured in Aluminised mild steel in our engineering shop here in the UK, all in larger bore pipework and silencers designed for a bigger engine This exhaust full system comprises of

• front pipes , left hand one, plus the right hand one is in 2 pieces
• middle silencer,
• rear silencer with tailpipe exiting on the drivers side
• larger tailpipe bracket, clamps, nut bolts and washers
• Rubber hanger kit ( not shown)

The front pipes are designed to mate nearside (LH) exhaust manifold up to 06/1979 will fit but manifolds after 06/1979 will have to be modified by cutting and welding or change to early type manifold. IMAGE FOR ILLUSTRATIVE PURPOSES ONLY STEVE PARKERS LIMITED have been designing and manufacturing conversion exhausts for over 25 years. Many of our exhausts are made in aluminised mild steel, 409 or 304 grade stainless steel. With mild steel flanges. Usually, they are designed for the engine requirements but also, we try to use the standard chassis brackets and rubber mountings. However, on some model’s other brackets may be required due to the many models of Land Rovers. We specialise in low volume bespoke exhausts. This full conversion exhaust kit is designed to follow the same route as the standard exhaust system and to hang on the same chassis brackets as the standard exhaust and is designed for vehicles that have are fitted with standard leaf springs and the standard Series gearbox. The exhaust is designed for the original Land Rover chassis. If a replacement chassis has been fitted there may be some differences in hangar brackets etc., causing fitting issues with the exhaust which is beyond our control.