300TDI DISCOVERY CONVERSION FULL KIT LAND ROVER SERIES LWB LHD
£1,674.85 (ex.VAT) £2,009.82 (inc.VAT)
Product Description
300TDI DISCOVERY CONVERSION FULL KIT LAND ROVER SERIES LWB LHD
300TDI DISCOVERY CONVERSION FULL KIT LAND ROVER SERIES LWB LHD. SKU SPCK338S3LWBFKL THIS KIT IS TO FIT THE 300TDI DEFENDER OR DISCOVERY ENGINE INTO A LAND ROVER SERIES 2, SERIES 2A & SERIES 3 LEFT HAND DRIVE LONG WHEEL BASE (109") 4 CYLINDER, WITH A STANDARD SERIES GEARBOX KIT CONTAINS:- CUSTOM BOLT ON RH ENGINE BRACKET KIT (SPCK338S3EBK)
- WATER PIPE KIT (SPCK338S3W) (USING DISCOVERY/DEFENDER 300 TDI RADIATOR)
- INTERCOOLER PIPE KIT LHD (SPCK338S3CLHD)
- NEW 300TDI MODIFIED INTERCOOLER (SPCK338S3CMODIC)
- OIL COOLER PIPES EXTENDED (SPCK338S3OCP)
- 300 TDI AIR FILTER ADAPTOR (SPCK338S3A) (ADAPTING THE AIR FILTER OFF THE DONOR DISCOVERY OR DEFENDER 300 TDI)
- CUSTOM EXHAUST SYSTEM WITH MOUNTINGS ETC (EXHS3LWBD300)
COMPREHENSIVE FITTING INSTRUCTIONS ARE INCLUDED WITH ALL THE KITS
MORE OR LESS EVERYTHING YOU NEED TO FIT A DISCOVERY 300 TDI INTO YOUR LAND ROVER SERIES. HOWEVER SOME PARTS MAY NEED A BIT OF ALTERATION TO FIT DUE TO BEING LEFT HAND DRIVE.
AN ELECTRIC FAN WILL BE NEEDED FOR THIS CONVERSION (DA8963) PLEASE SEE RELATED ITEMS BELOW
SEE INDIVIDUAL KITS IN RELATED ITEMS BELOW ALONG WITH VIDEOS
PLEASE SEE OUR SUMMARY OF INSTALLATION FOR MORE INFORMATION AND VIDEOS 300TDI INTO SERIES SUMMARY
WE CAN ALSO SUPPLY A POWER STEERING KIT TO SUIT THE RANGE ROVER P38 PAS BOX, DEFENDER 90/110 STEERING COLUMN AND WHEEL. SEE SPCK339PASKIT3
IMAGE FOR ILLUSTRATIVE PURPOSES ONLY
Steve Parkers Limited have been designing and fitting land rover engine conversions for over 40 years. We have also been manufacturing in house, conversion exhausts for over 25 years. We try to supply a comprehensive set of conversion kits, so that when the job is finished it looks like a factory installation. They are supplied as separate kits to allow them to be bought individually or they can be added to the basket and all bought at once depending on your requirements. Many of our conversion parts are manufactured by a company with en iso 9002 approved and covered by liability insurance.
STEVE PARKERS LIMITED have been designing and manufacturing conversion exhausts for over 25 years. Many of our exhausts are made in aluminised mild steel, 409 or 304 grade stainless steel. With mild steel flanges. Usually, they are designed for the engine requirements but also, we try to use the standard chassis brackets and rubber mountings. However, on some model’s other brackets may be required due to the many models of Land Rovers. We specialise in low volume bespoke exhausts.
We manufacture this conversion exhaust 2½” aluminised mild steel in our engineering shop here in the UK
This full conversion exhaust kit is designed to follow the same route as the standard exhaust system and to hang on the same chassis brackets as the standard exhaust and is designed for vehicles that have are fitted with standard leaf springs and the standard Series gearbox. The exhaust is designed for the original Land Rover chassis. If a replacement chassis has been fitted there may be some differences in hangar brackets etc., causing fitting issues with the exhaust which is beyond our control.
More Images
