New – Series Land Rover Power Steering Kit Now Available

We have been developing this conversion for the Series S2a & Series 3 Land Rovers for quite some time to get it right.

Our power steering conversion is quite unique, it is the only power steering conversion available that will give you 3 turns from lock to lock, not the usual 4 turns that manual and other power steering conversions steering have, we found that with 4 turns the steering was “overpowered” and too light at speed. So with our unique steering system we have made the steering with more feel and slightly heavier. Land Rover models with power steering have 3 turns lock to lock. This is using a P38 Pas Box (Not supplied) mounted with our specially made brackets, Defender 90/110 steering column & matching wheel |(Not Supplied) and then our modified drag link and track rod assemblies complete with track rod ends and modified adaptors. click this link for more details  Pas Conversion Series 2A & S3 Land Rovers

SPCK339PASK2 POWER STEERING KIT LAND ROVER SERIES 2A-3

Launch Uk Automatic Gearbox Flushing Machine

This garage is now equipped with an Automatic Gearbox Transmission Flushing Machine

Now available Automatic Gearbox Flushing using the new Launch Uk Automatic Transmission Flushing Machine. This does a complete flush of the automatic transmission oil. Unlike traditional emptying methods which leave around 40% still in the gearbox components like the torque convertor, this machine flushes a detergent through the gearbox and replaces 100% of the total oil capacity.

Symptoms that indicate you require an oil change include

♦Rough gear change

♦Slow or delayed gearshifts

♦Difficult to move from park or reverse

♦Noisy gear changes or loud transmissions running

♦An increase in transmission vibrations felt inside the vehicle

After a successful ATF oil service you will notice the below improvements

♦Smoother gear change

♦Reduced transmission noise

♦Easier gear selection

♦Reduced transmission vibrations

♦Faster up shift during acceleration

This can be carried out in our workshop with advance booking. Please contact Kevin in the service department on 01706 854223 or email service@steveparkers.com

This can be carried out while you wait or we have low cost hire cars if you have a full driving license

If required we can also renew the filter and transmission sump pan. If there are any faults stored we can clear them out with our Autologic Diagnostic computer

 

 

 

Black Friday Discount

BLACK FRIDAYBlack Friday Discount

We are offer a 10 % discount off everything on-line for the whole weekend using discount code NOV15 at the checkout.

You can also use this discount code for the Click and Collect service and collect your goods in-store

This is an on-line discount only and all parts must be ordered via our web site

If you come into our shop this discount will not be offered unless ordered via click & collect

Steve Parkers Ltd

200TDI and 300TDI Temp Sender Conversion kits

We at Steve Parkers have developed 200Tdi and 300Tdi Temp Sender Conversion kits

SPCK238TOILS3 OIL TEMPERATURE ADAPTOR KIT

This kit is design to fit Land Rover Series 3 with the smith temperature gauge it fits in the lower half of your engine sump so that you are able to read your oil temperature. This can be used on both conversions

ERC8973 Temperature Sender Adaptor Fine Thread Land Rover late Series 2A and Series 3

This a fine thread temperature sender adaptor to enable you to use the standard Land Rover Series Late 2A & Series 3 temperature sender 560794 to allow the gauge to read the engine temperature. We can also supply this with temp sender (SPCK224TADAPS3)

This is also suitable for other engine conversion in the Series Land Rovers.

Our Adaptor has been modified from the original part number with a longer external thread

SPCK338TADAPS3 300TDI TEMP SENDER ADAPTOR FOR SERIES

300TDI TEMP SENDER ADAPTOR FOR SERIES, This is a specially machined thermostat plug adaptor made from brass to fit into the top of the thermostat housing

Our temperature sender conversion adaptor will allow you to fit the standard Land Rover Series 3 temp sender 560794 which will give you correct temperature readings on the Land Rover Series 2A (from 1968) & Series 3 temperature gauge  when a 300 Tdi engine is fitted from a Defender or Discovery 1

We are Closed for Bank Holiday

We are Closed for Bank Holiday

Its not long now for the first Bank holiday of May

We will be closed on the 4th May 2015 for Bank Holiday Monday the first Monday of May

We are open until 12.30pm on Saturday and then will be closed until Tuesday 5th May where we will re-open at 8am

You will be able to place orders on-line via our website www.steveparkers.com when we are closed which we will process when we return on the Tuesday

New Steve Parkers Catalogue Now Available

We now have in stock our new Catalogue featuring a large range of Parts and Accessories for all models of Land Rover and Range Rovers

Please feel free to pop in and collect your new edition we aim to send copy out with every order placed where possible

Steve Parkers Catalogue Edition 11

Steve Parkers Catalogue Edition 11

CLOSED FOR STOCK TAKING AND EASTER WEEKEND AND THURSDAY LATE NIGHT OPENINGS

CLOSED FOR STOCK TAKING AND EASTER WEEKEND AND THURSDAY LATE NIGHT OPENINGS

In the upcoming weeks we will be closed for Stock Taking and Easter Weekend.

Stock Taking weekend

Will be closed from Friday 27th March 2015 from 5.30 pm  and on Saturday 28th March 2015.  We will reopen on Monday 30th March 2015 at 8.00 am

All parts will be available to order via our website  www.steveparkers.com all orders will be processed on Monday 30th March 2015

 

Due to us been closed on the Saturday we have decided to do stay open later on Thursday 26th March 2015 until 7.00 pm to allow customers to collect parts out of working hours

 

Easter Weekend

We will be closed from 7.00pm on  Thursday 02nd April 2015 until 8.00 am on Tuesday 07th April 2015 for Easter Weekend so we will be closed Good Friday, Saturday, Sunday and the Easter Monday however we will be staying open late on the Thursday before for parts

All parts will be available to order via our website  www.steveparkers.com all orders will be processed on the Tuesday 7th April 2015 we return back to work.

 

Defender roof console

DA4629 Defender roof console

Defender roof console

Designed with CAD software.

> Supplied with interior lamp extension loom and DIN blanking panel.
> Fitting kit and instructions are also supplied.
> Finished in grey only.

The console offers a unique storage solution for the Defender in providing additional overhead roof storage as well as a single DIN provision in one unit. The two side sections are designed to hold anything from maps to sunglasses, documents to magazines.

The console is supplied in three separate pieces. The product has been designed with CAD software and the moulding finished off using CNC machinery to ensure an OE level fit and finish to the product.
It is supplied with a DIN blanking panel but the central binnacle will fit any DIN sized accessory such as a stereo, CB/HAM radio or even a digital tachograph. The single DIN aperture will also accept a bank of seven Carling Technologies switches by using the Carling interlocking switch mounts.

Will the Defender roof console fit my vehicle?
The console has been designed to fit all post 1983 Defender models without a sunroof and with a factory headlining. The fixing method does not require removal or cutting of the headlining or sun visors. (Some later models will require trimming of the central area of the headlining when fitting a DIN unit). If you have a non-factory headlining it is unlikely it will fit without modification of the headlining. If you have a Series vehicle, again it is unlikely it will fit without modification.

Steve Parkers Ltd

Welcome to the Steve Parkers Blog

Welcome to the Steve Parkers Blog

Latest news on everything we love about Land Rovers, Range Rovers, Conversions will be posted right here so subscribe to our blog.